High Precision 6706-2RS Thin Section Deep Groove Ball Bearing
Item No :
6706-2RSSize (d*D*B) :
30x37x4mmLead Time :
3-5 daysWeight :
0.009KGShipping Port :
Guangzhou, Ningbo, ShanghaiMOQ :
50 pcs
| Item No. | 6706-2RS |
| Branding | famous brand/RMO/Neutral/OEM |
| Sealing | OPEN, ZZ , 2RS |
| Material | carbon steel, hybrid ceramic, full ceramic,GCR15,stainless steel (420 440C 304 316) |
| Lead Time | 3-5 days |
| Precision | p0 p6 p5 p4 |
| Clearance | C2 C0 C3 C4 |
| Vibration | Z1V1, Z2V2, Z3V3 |
| Cage material | Steel, nylon, copper |
| Shipping Port | GUANGZHOU, NINGBO, SHANGHAI |
| Payment | 100% T/T, or 30% T/T In Advance ,70% T/T After Finished Production |
Load capacity: The rated dynamic load is approximately 1140 Newtons, and the rated static load is 947 Newtons. It mainly bears radial loads and can also withstand certain bidirectional axial loads.
Lubrication and speed: When delivered, the products are usually filled with appropriate lubricating grease. Under the condition of grease lubrication, the maximum speed of some products can reach around 5500 revolutions per minute. If lubricating oil is used instead, the maximum speed may be able to be increased.
The 6706-2RS produced by different manufacturers may have some differences in terms of rated speed and specific load-bearing data.
| Bearings No. | ID(d*D*B)mm | Weight (KG) | Bearings No. | ID(d*D*B)mm | Weight (KG) |
| 672ZZ | 2*4*2 | 0.0001 | 672RS | 2*4*2 | 0.0001 |
| 6700ZZ | 10*15*4 | 0.002 | 6700RS | 10*15*4 | 0.002 |
| 6701ZZ | 12*18*4 | 0.003 | 6701RS | 12*18*4 | 0.003 |
| 6702ZZ | 15*21*4 | 0.004 | 6702RS | 15*21*4 | 0.004 |
| 6703ZZ | 17*23*4 | 0.004 | 6703RS | 17*23*4 | 0.004 |
| 6704ZZ | 20*27*4 | 0.006 | 6704RS | 20*27*4 | 0.006 |
| 6705ZZ | 25*32*4 | 0.007 | 6705RS | 25*32*4 | 0.007 |
| 6706ZZ | 30*37*4 | 0.009 | 6706RS | 30*37*4 | 0.009 |
| 6707ZZ | 35*44*4 | 0.015 | 6707RS | 35*44*4 | 0.015 |
| 6708ZZ | 40*50*6 | 0.023 | 6708RS | 40*50*6 | 0.023 |
| 6709ZZ | 45*55*6 | 0.03 | 6709RS | 45*55*6 | 0.03 |
| 6710ZZ | 50*62*6 | 0.045 | 6710RS | 50*62*6 | 0.045 |
CNC machinery
antenna systems
radars
| 1. Keep clean | 2. Use with caution | 3. appropriate tool | 4. Hot-loading | 5. Be careful of rust |
| Dust will have a bad effect on the bearing, so keep the surrounding clean. | Strong impact during use can easily cause scratches and indentations. | Avoid replacing existing tools, and use appropriate tools. | Bearings are precision parts, so hot installation is recommended. | Sweat on your hands during operation will cause rust, so it is best to wear gloves. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
6×12×4mm MR126ZZ bearings are made of chrome steel with high precision and low noise. We have large stock and can provide free samples for testing
Details
R168ZZ bearing is made of chrome steel. Excellent performance and low noise level. We have it in stock and can provide free sample for testing.
Details
It's composed of an inner ring, an outer ring, steel balls and a cage.
Details
Similar to standard single-row deep groove ball bearings, it is composed of components such as inner ring, outer ring, steel balls and cage.
Details
This nylon cage is suitable for 51105 thrust ball bearings and is made of nylon PA66 material.
Details
IPv6 network supported
