8x19x7mm F8-19M Miniature Thrust Ball Bearing With Brass Cage
Item No :
F8-19MSize (d*D*B) :
8x19x7mmLead Time :
3-5 daysWeight :
0.0091KGShipping Port :
GuangZhou, NingBo, ShangHaiMOQ :
100 pcs8x19x7mm F8-19M Miniature Thrust Ball Bearing With Brass Cage
⚙️Structural Design:
Component composition: It is composed of two washers, a set of balls and a cage assembly. The washers are used to support axial loads, while the ball and cage assembly enables the bearing to maintain low friction during high-speed rotation.
Raceway type: It adopts a grooved raceway design. This design ensures that when the bearing is subjected to axial loads, the balls have better contact with the raceway and the load is distributed more evenly, thereby enhancing the bearing's load-carrying capacity and operational stability.
| Cage material | Steel, Nylon, Copper |
| Branding | famous brand/RMO/Neutral/OEM |
| Material | Chrome steel(Gcr15) or stainless steel |
| Precision | ABEC-1 ABEC-3 ABEC-5 ABEC-7 |
| Shipping Port | Guangzhou, Ningbo, Shanghai |
| Payment | 100% T/T or 30% T/T in advance ,70% T/T after finished production |
| Service | Free sample can be provided |
| Model No. | d | D | H | m |
| F3-8M | 3 mm | 8 mm | 3.5 mm | 0.9 g |
| F4-9M | 4 mm | 9 mm | 4 mm | 1.2 g |
| F4-10M | 4 mm | 10 mm | 4 mm | 1.5 g |
| F5-12M | 5 mm | 12 mm | 4 mm | 2.1 g |
| F6-12M | 6 mm | 12 mm | 4.5 mm | 2.2 g |
| F6-14M | 6 mm | 14 mm | 5 mm | 3.5 g |
| F7-13M | 7 mm | 13 mm | 4.5 mm | 2.6 g |
| F7-17M | 7 mm | 17 mm | 6 mm | 6.5 g |
| F8-16M | 8 mm | 16 mm | 5mm | 4.5 g |
| F8-19M | 8 mm | 19 mm | 7 mm | 9.1 g |
| F9-20M | 9 mm | 20 mm | 7 mm | 9.9 g |
| F10-18M | 10 mm | 18 mm | 5.5 mm | 5.4 g |
automotive industry, motor field, aerospace, medical devices, etc.
| 1. Keep clean | 2. Use with caution | 3. appropriate tool | 4. Hot-loading | 5. Be careful of rust |
| Dust will have a bad effect on the bearing, so keep the surrounding clean. | Strong impact during use can easily cause scratches and indentations. | Avoid replacing existing tools, and use appropriate tools. | Bearings are precision parts, so hot installation is recommended. | Sweat on your hands during operation will cause rust, so it is best to wear gloves. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
6×12×4mm MR126ZZ bearings are made of chrome steel with high precision and low noise. We have large stock and can provide free samples for testing
Details
R168ZZ bearing is made of chrome steel. Excellent performance and low noise level. We have it in stock and can provide free sample for testing.
Details
It's composed of an inner ring, an outer ring, steel balls and a cage.
Details
Similar to standard single-row deep groove ball bearings, it is composed of components such as inner ring, outer ring, steel balls and cage.
Details
This nylon cage is suitable for 51105 thrust ball bearings and is made of nylon PA66 material.
Details
IPv6 network supported
