Item No :
6011RSSize (d*D*B) :
55x90x18mmLead Time :
3-5 daysWeight :
0.38KGShipping Port :
ChinaMOQ :
50 pcs6011RS P5 Grade Deep Groove Ball Bearing
⚙️Structural composition:
The 6011 P5 grade deep groove ball bearing adopts standardized design, mainly consists of the following components:
1. One inner ring and one outer ring, forming the track for the steel balls to move on.
2. A cage, used to evenly separate the steel balls.
3. A group of steel balls, constituting the rolling friction pair.
| Cage material | Steel |
| Branding | Famous Brand/RMO/Neutral/OEM |
| Sealing | OPEN, ZZ , 2RS |
| Material | Chrome Steel (Gcr15)or Stainless Steel |
| Precision | ABEC-1 ABEC-3 ABEC-5 ABEC-7 |
| Clearance | C0 C3 |
| Vibration | Z1V1, Z2V2, Z3V3 |
| Shipping Port | GUANGZHOU, NINGBO, SHANGHAI |
| Payment | 100% TT, or 30% TT In Advance ,70% TT After Finished Product |
| Service | Free Sample Can Be Provide |
Load capacity: Rated static load 21.8kN, dynamic load 30.2kN.
Lubrication speed: Limit speed for grease lubrication 7000r/min, limit speed for oil lubrication 8500r/min.
Geometric tolerances: Inner diameter 55mm ± 0.012mm, outer diameter 90mm ± 0.013mm.
1. The axial offset between the bearing seat hole and the shaft should be controlled within a reasonable range.
2. The maximum inclination angle of the shell hole relative to the shaft is allowed to be 8' - 16'.
3. It is recommended to use the hot assembly method, with the heating temperature not exceeding 120℃.
4. After installation, the axial clearance should be adjusted to a reasonable range.
| Model No. | d | D | H | m | Model No. | d | D | H | m | |
| 6006RS | 30 mm | 55 mm | 13 mm | 0.12 KG | 6017RS | 85 mm | 130 mm | 22 mm | 0.89 KG | |
| 6007RS | 35 mm | 62 mm | 14 mm | 0.15 KG | 6018RS | 90 mm | 140 mm | 24 mm | 1.19 KG | |
| 6008RS | 40 mm | 68 mm | 15 mm | 0.19 KG | 6019RS | 95 mm | 145 mm | 24 mm | 1.16 KG | |
| 6009RS | 45 mm | 75 mm | 16 mm | 0.24 KG | 6020RS | 100 mm | 150 mm | 24 mm | 1.15 KG | |
| 6010RS | 50 mm | 80 mm | 16 mm | 0.26 KG | 6021RS | 105 mm | 160 mm | 26 mm | 1.59 KG | |
| 6011RS | 55 mm | 90 mm | 18 mm | 0.38 KG | 6022RS | 110 mm | 170 mm | 28 mm | 1.96 KG | |
| 6012RS | 60 mm | 95 mm | 18 mm | 0.4 KG | 6024RS | 120 mm | 180 mm | 28 mm | 2.05 KG | |
| 6013RS | 65 mm | 100 mm | 18 mm | 0.42 KG | 6026RS | 130 mm | 200 mm | 33 mm | 3.15 KG | |
| 6014RS | 70 mm | 110 mm | 20 mm | 0.59 KG | 6028RS | 140 mm | 210 mm | 33 mm | 3.35 KG | |
| 6015RS | 75 mm | 115 mm | 20 mm | 0.62 KG | 6030RS | 150 mm | 225 mm | 35 mm | 4.8 KG | |
| 6016RS | 80 mm | 125 mm | 22 mm | 0.86 KG | 6032RS | 160 mm | 240 mm | 38 mm | 5.9 KG |
This bearing performs exceptionally well in the following scenarios:
1. Rotating components such as motors and gearboxes that need to withstand radial loads.
2. Transmission systems with combined loads.
| 1. Keep clean | 2. Use with caution | 3. appropriate tool | 4. Hot-loading | 5. Be careful of rust |
| Dust will have a bad effect on the bearing, so keep the surrounding clean. | Strong impact during use can easily cause scratches and indentations. | Avoid replacing existing tools, and use appropriate tools. | Bearings are precision parts, so hot installation is recommended. | Sweat on your hands during operation will cause rust, so it is best to wear gloves. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
6×12×4mm MR126ZZ bearings are made of chrome steel with high precision and low noise. We have large stock and can provide free samples for testing
Details
R168ZZ bearing is made of chrome steel. Excellent performance and low noise level. We have it in stock and can provide free sample for testing.
Details
It's composed of an inner ring, an outer ring, steel balls and a cage.
Details
Similar to standard single-row deep groove ball bearings, it is composed of components such as inner ring, outer ring, steel balls and cage.
Details
This nylon cage is suitable for 51105 thrust ball bearings and is made of nylon PA66 material.
Details
IPv6 network supportedHi! Click one of our members below to chat on
